annealed是什么意思_annealed怎么读_annealed造句和翻译

anneal

v.给…上釉；【冶】使韧化；〈比喻〉锻练(意志)

网络释义：退火；退火的；退火状态

v.harden,strengthen,toughen,galvanize,forge

网络释义

v.1.〈古〉(在窑里)烧,给...上釉2.【冶】使韧化,使退火,使焖火3.〈比喻〉锻练(意志)

v.1.to make something, especially an opinion, a feeling, or an intention, stronger, firmer, or more resolute2.to subject an alloy, metal, or glass to a process of heating and slow cooling to make it tougher and less brittle3.to subject nucleic acid to a process of heating and cooling in order to separate its strands

1.退火 锚固、地脚 anchor 退火的 annealed 一年一次的 annual ...

3.退火状态艺处理后，欧美 对于合金状态的字母表示是：A 表示固溶退火态(annealed)，合金处于最软状态，易于冲压加工成形，有 待 …

7.焖火 conduit 导管，导线管 annealed 退火，焖火 clamp 夹住，夹紧 ...

8.回火 ASAP = As Soon As Possible 尽速 23. Annealed 淬回 回火 24. Artwork 底片 胶片 25. ...

1.The washer is usually made of annealed nickel and has a highly polished surface.垫圈通常用退火镍制成，具有非常光滑的表面。

2.Hot rolled stainless steel bars that are annealed and cold worked to produce a higher surface quality and higher strength.经过退火及冷加工的热轧不锈钢棒材，其表面质量更高，强度也更高。

3.When gill hole was enlarged and handlers was formed after annealed, the surface shallow crack and chap appeared.当锻件退火后进行鳃孔扩口和柄部弧形弯曲时，过热和过烧的缺陷引起表面浅层裂纹和龟裂。

4.Bearing cones must be annealed prior to machining and a subsequent post heat-treat hardening.退火轴承锥必须事先向加工和随后的后热处理硬化治疗。

5.In this paper the annealed structure and its grade of bearing steel with abnormal original structure have been studied.本文研究了非正常原始组织的轴承钢，退火后的组织及其评级问题。

6.The copper is slowly drawn through the die in extremely small increments and is annealed following each drawing operation.铜正在慢慢穿过死在非常小的增量和退火以下是每个绘图作业。

7.Temper-all material shall be thoroughly and evenly annealed, and dead soft, unless otherwise specified by the purchase order.除非采购订单另有规定，否则所有材料的回火应该彻底而均匀地退火，完全软化。

8.Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness exceeding 10 mm.其它热轧不锈钢扁轧制品，未经热轧退火酸洗，非卷盘状，厚度超过10公厘者。

9.The experiments show that the microstructure of annealed sample is favourable to improving reverse breakdown voltage.实验表明，退火后样品的微观结构有利于提高反向击穿电压。

10.When it is annealed, amount of cokes are put into the furnace which is sealed up to prevent the oxidization of mould.在进行退火处理时，退火炉内放入一定量的焦炭，并且将炉门四周密封，防止铸钢件表面氧化。