gaskets是什么意思_gaskets怎么读_gaskets造句和翻译

gasket

n.【机】垫圈；【航】束帆索

网络释义：垫片；密封圈；衬垫

n.seal,washer,liner,ring,lining

网络释义

n.1.【机】垫圈,垫片2.【航】束帆索

n.1.a flat ring of rubber, metal, or plastic that you put between two surfaces in a pipe or machine so that liquid or gas cannot escape

1.垫片 Belt Drive 皮带驱动 Gaskets 垫片 Regulator 调节器 ...

2.垫圈 Sampson 桑普森 Gaskets 垫圈 Sampson Gaskets Limited 桑普森垫圈有限公司 ...

3.密封圈 Glass chamber( 玻璃缸 ） Gaskets（ 密封圈） Stopcocks（ 流速调节阀…

4.衬垫 gasket 垫片，垫圈；接合垫 gaskets 垫片，垫圈；接合垫 gasometer 煤气厂, 气量计 ...

6.密封衬垫acers）、2-D电泳梳(2-D combs)、密封衬垫（gaskets）和玻板（glass plates），适合1.0 mm、1.5 mm或2.0 mm厚度的凝胶

7.密封垫片 Fasteners 紧固件 Gaskets 密封垫片 Hose 软管 ...

1.Gaskets in grooves around the periphery contain the fluids and direct the flows into and out of the spaces between the plates.密封胶垫安装在板片四周的凹槽内，起密封以及导流的作用。

2.During tests for BOP flange leaks, do not plug off the ring gaskets with bentonite or lost circulation materials to stop leaks.对防喷器法兰进行试压时，不答应用膨润土或堵漏材料填堵密封槽来制止滴漏。

3.The number and type of gaskets is identical to that of the B-200 motor, except being of a lesser diameter.的数量和类型垫片是相同的表示，在该B-200型汽车，除了被一个较小的直径。

4.Thus, gaskets are used. Head gaskets are made of him sheets of soft metal or of asbestos and metal.这样，就要使用气缸垫。气缸盖用的密封垫是用软金属薄片或金属和石棉组成的薄片制成。

5.The gaskets are of drip molding with the surface specially treated to ensure harmonization and reliability.该垫圈进行滴灌成型与表面特殊处理，以确保统一和可靠性。

6.The number and type of gaskets is identical to that of the B-200 motor, except having a larger diameter.的数量和类型垫片是相同的表示，在该B-200型汽车，除了有一个直径较大。

7.The bolted flanged connections with fibrous reinforcement gaskets were chosen to be the test objects, and their failure modes were analyzed.以纤维增强橡胶基垫片-螺栓法兰连接系统为研究对象，分析了密封连接的故障模式；

8.demolished over the oil seals, gaskets generally should not continue to use, should be replaced.拆卸过的油封、密封垫一般不应该继续使用，应该更换。

9.When exposed to the heat, the rubber seals and gaskets inside the transmission hardens, which will cause leaks.当接触到热、橡胶密封垫片在传输变硬，这将导致泄漏。

10.Exposed to the heat the rubber seals and gaskets inside the transmission become hardened causing leaks.变速器内的橡胶油封、垫圈受热后会老化，产生泄漏。